实木水族箱柜现已面向新西兰客户发售。查看更多

买得越多,省得越多——每笔订单满 150 美元即可享受免运费!了解更多

Red and green stem plants in a planted aquarium, with tetras swimming above them.

Build your CO₂ kit

Answer a few questions and we'll match a regulator, diffuser and tubing that work together.

Step 1 of 7 Tank

1Your tank

What size is your aquarium?

Bigger tanks need a diffuser that can dissolve more CO₂, so this sets which diffusers we show you.

Not sure of your volume? Measure length × width × height in cm and divide by 1,000 for litres.
2Your gas

Which CO₂ supply do you use?

This sets which regulators fit. Sodastream cylinders need an adapter, and 16g cartridges use their own small regulator.

Standard cylinders come from a gas supplier, or from us within New Zealand.
3Your filter

Which filter do you run?

Canister and sump filters can take an inline diffuser in the hose, out of sight. Hang-on-back and internal filters use an in-tank diffuser instead.
4Regulator

Pick your regulator

The regulator sits on your gas supply and controls how much CO₂ goes into the tank.

5Diffuser

Choose your diffuser

A diffuser dissolves CO₂ gas into tiny bubbles that your plants can absorb. Finer mist means better dissolution and less wasted gas.
6Tubing

Pick your CO₂ tubing

CO₂ tubing is made to hold CO₂. Standard airline tubing isn't, so use tubing made for the job.

Add 30–50 cm extra to allow a neat run behind your cabinet or stand. CO₂ hose cuts easily with scissors.

Other lengths

7Extras

Finish your kit

Not required, but each one has a job in a dialled-in system. Add as many as you like.

A drop checker shows your CO₂ level by colour. Your regulator's bubble counter already has a check valve; a second one near the tank is a backup.

Recommended add-ons Optional

Your CO₂ kit

Every part here fits your answers. Tap Change to swap one.

Kit price
Total

In-stock orders ship next business day.

Not included: a CO₂ cylinder, and a plug-in timer if your regulator doesn't come with one. Shop cylinders

What's in a CO₂ kit

Numbered in the order the gas travels, from the cylinder to your tank.

Co2 Art PRO-SE 系列 - 带集成电磁阀的水族箱二氧化碳双级调节器
Aquapro 聚氨酯 CO₂ 管 - 透明
Week Aqua 快插式止回阀
Wyin Aqua 外部直列式 CO₂ 扩散器
CO2 艺术 Co2 玻璃滴检查器套件
  1. Co2 Art PRO-SE 系列 - 带集成电磁阀的水族箱二氧化碳双级调节器

    Regulator

    Screws onto the cylinder and brings the gas down to a low working pressure. Its needle valve sets how fast the CO₂ flows.

  2. Solenoid

    An electric valve on the regulator. Plug it into a timer and the CO₂ switches off when your lights do.

  3. Bubble counter

    A small water-filled chamber, so you can see and count the bubbles while you set the rate.

  4. Aquapro 聚氨酯 CO₂ 管 - 透明

    CO₂ tubing

    Carries the gas to the tank. It's made to hold CO₂, which standard airline tubing doesn't do well.

  5. Week Aqua 快插式止回阀

    Check valve

    Lets gas through one way only, so water can't run back into the regulator when the gas is off.

  6. Wyin Aqua 外部直列式 CO₂ 扩散器

    Diffuser

    Breaks the gas into fine bubbles so it dissolves. In-tank diffusers sit in the aquarium; inline ones fit in a canister filter's hose.

  7. CO2 艺术 Co2 玻璃滴检查器套件

    Drop checker

    Sits in the tank and changes colour with the CO₂ level: blue is low, lime green is about right, yellow is too much.

Parts shown are examples. The builder picks the ones that fit your tank.

Start building

Before and after CO₂

A planted cube aquarium with a few clumps of green plants and bare substrate between them.
Before CO₂
A planted cube aquarium filled with a green carpet and red and green stem plants.
After CO₂

The kind of change CO₂ can make. Results depend on your light, plants and care.

From people running our CO₂ gear

See why customers, love shopping with us!

  • Aquapro 紧凑型二氧化碳调节器,配备先进的电动电磁阀

    Really easy to operate, even as a beginner. … I also really appreciate Aquascape’s support, they answered all my questions and gave me helpful tips about precautions, things to look out for, and how to safely manage the CO₂ system. That support made me feel much more confident using CO₂ for the first time. …

    LouieNew Zealand

    All Aquapro Single Stage Compact CO2 Regulator reviews
  • Co2 Art Bazooka 助焊剂扩散器

    Love this diffuser! A fog of tiny bubbles comes out of it which makes it very efficient (almost too efficient!) getting the CO2 into the water. We had to dial the regulator back to reduce the amount coming through but think we’ve got the balance now.

    Richard SpensleyNew Zealand

    All Co2 Art Bazooka Flux Diffuser reviews
  • Co2 Art PRO-ELITE系列最先进的水族箱双级二氧化碳调节器

    … Worth the initial outlay of cost for me. So consistent. Pressure was set to 41 about 4 weeks ago and hasn't moved at all so very impressed with stability and consistency so far. …

    Alfred PhillipsAustralia

    All Co2 Art PRO-ELITE Series v2 reviews
  • Aquapro 聚氨酯 CO₂ 管 - 透明

    No issues, but make sure you stick it in a bowl of almost-boiling water for 10 minutes or so to soften it up before trying to use it

    AnonymousNew Zealand

    All Aquapro Polyurethane CO₂ Tubing reviews
  • Wyin Aqua Mini CO2 Cartridge Regulator (16g)

    Simple easy set up and works well.

    AnonymousNew Zealand

    All Wyin Aqua Mini CO₂ Regulator reviews

Before you start

Getting started with CO₂ injection

Is CO₂ safe for my fish?

Yes, when you add it gradually and switch it off at night. Start with a slow bubble rate and raise it a little each day while you watch your fish. If they gasp at the surface, turn the rate down and add surface movement. A solenoid on a timer turns the gas off when the lights go off, and a drop checker shows the level by colour.

What do I need for a complete CO₂ system?

A CO₂ cylinder to hold the gas, a regulator with a solenoid to control the flow and switch it off at night, CO₂ tubing, and a diffuser to dissolve the gas into your water. A check valve and a drop checker are worth adding too. The builder matches the regulator, diffuser and tubing to your tank. The cylinder isn't part of the kit, except on the 16g cartridge path, where a 5-pack of cartridges is added for New Zealand orders. Some regulators come with a digital timer; for the rest you'll need a plug-in timer for the solenoid.

Is setting up a CO₂ system difficult?

Not really. Screw the regulator onto the cylinder, run CO₂ tubing to the diffuser and plug the solenoid into a timer. Then start with a slow bubble rate and raise it a little each day while you watch your fish and the drop checker.

Do I really need CO₂ for my planted tank?

No. Plenty of plants grow well without it. Carbon is the main building block of plant tissue, though, and without injection aquarium water holds only a few ppm of CO₂, while injected planted tanks usually run around 30ppm. Adding it lets you grow faster, denser plants and a wider range of them, including many carpeting and red plants that struggle without it.

Is CO₂ beneficial even for low-light tanks?

Yes. Under lower light, plants use CO₂ more slowly, so a gentle bubble rate is enough and growth stays steady and easy to manage. Keep the light period the same each day and use a drop checker to keep the level where you want it.

What's the difference between a “high tech” and “low tech” tank?

“High tech” simply means you're injecting CO₂. The term sounds intimidating but the setup is straightforward. Going high tech lets you grow a much wider variety of plants with better colour, density, and growth rates.

What else do I need besides a CO₂ system?

Good lighting and a fertiliser routine. Light drives photosynthesis, which is what lets your plants use the CO₂. Fertilisers supply the nutrients plants need to grow: nitrogen, phosphorus, potassium, iron and trace elements. When light, CO₂ and nutrients are in balance, your plants thrive. We carry lights and fertilisers if you need them.

Regulators and solenoids

What's the difference between a single-stage and dual-stage regulator?

A single-stage regulator reduces cylinder pressure to working pressure in one step. A dual-stage regulator does it in two steps, which means the output pressure stays more consistent as your cylinder empties over time. Both get the job done. Dual-stage just offers added precision and stability.

What does the solenoid do?

The solenoid is an electric valve on the regulator that turns the CO₂ on and off. Put it on a timer so the gas runs only during your light period: start it 1 to 2 hours before the lights come on and stop it 1 hour before they go off. Overnight the gas stays off, which saves CO₂ and keeps your fish safe while they rest.

Do I need a bubble counter?

A bubble counter lets you visually monitor your injection rate by counting bubbles per second. Many regulators have one built in. It's useful for setting a consistent rate and noticing if anything changes.

CO₂ diffusion methods

How do I know what size my canister filter hoses are?

The easiest way is to check your filter’s specifications. Most brands list hose sizes as inner diameter (ID) and outer diameter (OD), like 12/16mm or 16/22mm.

If you’re unsure or don’t have the specs:

  • Measure the hose directly using a ruler or caliper (measure the inner and outer diameter in millimetres).
  • Check the model online. Search for your filter’s name and its listing will usually give the hose size.
  • Look at common standards:
    Small filters: typically 12/16mm
    Larger filters: typically 16/22mm

If you’re still not sure, send us your filter model or a photo and we’ll help you match it correctly.

What's the difference between an in-tank diffuser, inline diffuser, and inline atomizer?

In-tank diffusers sit inside the aquarium. They're affordable, easy to set up and suit smaller tanks. Inline diffusers and atomizers fit in a canister filter's outflow hose, so nothing shows in the tank and the filter flow carries the fine bubbles around.

Where should I place an in-tank diffuser?

Place it in the downward flow path created by your filter output. This pushes the CO₂ mist down and around the tank, maximising contact time with the water before bubbles reach the surface.

How often do diffusers need cleaning?

Clean an in-tank diffuser when the mist turns coarse or uneven, which for most tanks is every few weeks. Soak the ceramic disc in diluted bleach or hydrogen peroxide, then rinse it well in dechlorinated water before it goes back in. Inline diffusers and atomizers sit in the filter hose, so they need cleaning less often.

Your kit and ordering

Do all the parts in my kit work together?

Yes. The builder only shows parts that fit your answers about tank size, gas supply and filter, and for canister filters it matches the inline diffuser to your hose size. A CO₂ cylinder isn't included. If you're unsure about anything, message us before you order.

Can I swap a part after adding the kit to my cart?

Yes. The builder adds each part to your cart as its own item, so you can remove or change anything before checkout.

Can I get personalised advice?

Yes. Call or text 022 420 4229, or email sales@aquascapeshop.com, and we'll help you choose.

Ongoing use

How long does a CO₂ cylinder last?

It depends on the cylinder size, your bubble rate and how many hours a day the solenoid is open. As a rough guide, a Sodastream cylinder on a nano tank lasts several weeks, and a 3.5kg cylinder on a mid-size tank lasts several months. Once it's running, the main job is the occasional refill.

Where can I get my CO₂ cylinder refilled?

Standard cylinders can be refilled or swapped at gas suppliers, homebrew shops and some fire-extinguisher services. Prices and fittings vary, so call ahead. Sodastream cylinders swap at many supermarkets and appliance stores. 16g cartridges are single-use.

How do I know if my CO₂ levels are right?

A drop checker is the easiest way. It's a small glass indicator that sits in your tank: blue means too little CO₂, lime green means you're around the usual target of 30ppm, and yellow means too much. Good surface movement, a filter that spreads the CO₂ around the tank and plenty of plants all help keep your fish comfortable.

Not sure what you need? Ask us.

Send us your tank size and filter model and we'll help you choose.

Dispatch
In-stock orders ship next business day.
Pick-up
From 34B Te Pai Place, Henderson, Auckland. Usually ready within 24 hours; ring us before you come.
Cylinders
CO₂ cylinders and 16g cartridges ship within New Zealand only.
Australia
Regulators, diffusers and accessories ship to Australia. Shipping is worked out at checkout.