Week Aqua Compact Dual Gauge CO2 Regulator 已缺货,一旦有货就会发货。
描述
描述
The Week Aqua Compact Dual Gauge CO2 Regulator puts two gauges, a solenoid, a bubble counter and a fine-tuning valve on one small body. Its W21.8 inlet screws onto the side outlet of a standard pressurised CO2 cylinder valve, and the bubble counter stands upright beside it.
The body is machined from a single piece of aluminium alloy and anodised to resist corrosion. Inside the fine-tuning valve is a copper needle, made to resist wear and hold its setting, so you can dial in your bubble rate very precisely.
One gauge shows the pressure left in the cylinder and the other shows working pressure. The clear bubble counter lets you see your CO2 rate, and its built-in check valve stops water running back towards the regulator.
Fill the bubble counter with water before use, using the syringe that comes with it. Press down the collar on the quick-plug outlet, insert the syringe and inject the water, then remove the syringe and push your 4/6mm CO2 tubing all the way in. It locks in place, and pressing the collar releases it again.
CO2 is switched on and off by a low-voltage electromagnetic solenoid, powered by the included NZ/AU adapter. To run CO2 on the same schedule as your lights, plug the adapter into a plug-in timer.
Running a SodaStream cylinder? Pair this regulator with our aluminium side-entry SodaStream adapter (sold separately). It fits blue screw-in AU/NZ SodaStream cylinders and lays the cylinder on its side, which leaves plenty of room for the bubble counter.
Benefits
- Cylinder and working pressure gauges
- Fine-tuning valve with a copper needle for precise bubble-rate control
- Clear bubble counter with integrated check valve
- Quick-plug outlet for 4/6mm CO2 tubing
- Built-in solenoid with NZ/AU power adapter
- One-piece CNC aluminium body with an anodised finish
- Side mount design for cylinders with a side-facing valve
- Fits W21.8 cylinders, or SodaStream cylinders with our aluminium adapter
What's included
- Week Aqua Compact Dual Gauge CO2 Regulator with solenoid
- Bubble counter with integrated check valve
- Power adapter, NZ/AU plug
- Syringe for filling the bubble counter
Please note
CO2 cylinder, SodaStream adapter, tubing and diffuser not included. There is no built-in timer, so use a plug-in timer to switch the solenoid with your lights.
规格
规格
-
Stage Type
-
Cylinder Thread
-
Number of Gauges
-
Solenoid Included
-
Solenoid Type
-
Needle Valve Grade
-
Bubble Counter
-
Check Valve
-
Digital Timer
-
Manifold Compatible
-
Outlets Included
-
Connection Type
-
Outlet Barb Size
-
Body Material
-
Power Input
-
Plug Type
-
Warranty






