Wyin Aqua Dual Stage CO2 Modular Regulator

The Wyin Aqua Dual Stage CO2 Modular Regulator gives your planted tank a steady, adjustable supply of CO2 from a standard W21.8 cylinder. Two regulation stages keep the working pressure even as the cylinder empties, so your bubble rate holds and you avoid the end-of-tank dump that can harm livestock when a cylinder runs low.

Both gauges sit on top: one shows how much is left in the cylinder, the other shows working pressure. The precision needle valve sets your bubble rate, and the bubble counter has a check valve built in to stop water running back towards the regulator. Your 4/6mm CO2 tubing pushes straight into the quick-plug outlet.

CO2 is switched by a 12V electromagnetic solenoid, powered by the included NZ/AU adapter. To run CO2 on the same schedule as your lights, plug the adapter into a plug-in timer.

The output block is modular. Add Wyin Aqua Extension Manifold Blocks (sold separately) to run CO2 to more than one tank, or to several injection points in one tank, from a single cylinder.

Benefits

• Dual-stage regulation for steady output as the cylinder empties
• Cylinder and working pressure gauges
• Precision needle valve for fine bubble-rate control
• Bubble counter with integrated check valve
• Quick-plug outlet for 4/6mm CO2 tubing
• 12V electromagnetic solenoid with NZ/AU power adapter
• Modular block that expands with extension manifolds (sold separately)
• Aluminium and brass construction
• Fits W21.8 threaded CO2 cylinders

What's included

• Wyin Aqua dual-stage CO2 regulator with electromagnetic solenoid
• Bubble counter with integrated check valve (1 outlet)
• 12V power adapter, NZ/AU plug

Please note

CO2 cylinder not included. Some photos show the regulator fitted to a cylinder, and one shows it with an Extension Manifold Block added; both are sold separately. There is no built-in timer, so use a plug-in timer to switch the solenoid with your lights.